In Situ Anchoring of Pyrrhotite on Graphitic Carbon Nitride Nanosheet for Efficient Immobilization of Uranium

Enrichment of U^VI is an urgent project for nuclear energy development. Herein, magnetic graphitic carbon nitride nanosheets were successfully prepared by in situ anchoring of pyrrhotite (Fe₇S₈) on the graphitic carbon nitride nanosheet (CNNS), which were used for capturing U^VI. The structural characterizations of Fe₇S₈/CNNS-1 indicated that the CNNS could prevent the aggregation of Fe₇S₈ and the saturation magnetization was 4.69 emu g⁻¹, which meant that it was easy to separate the adsorbent from the solution. Adsorption experiments were performed to investigate the sorption properties. The results disclosed that the sorption data conformed to the Langmuir isotherm model with the maximum adsorption capacity of 572.78 mg g⁻¹ at 298 K. The results of X-ray photoelectron spectroscopy (XPS) demonstrated that the main adsorption mechanism are as follows: U^VI is adsorbed on the surface of Fe₇S₈/CNNS-1 through surface complexation initially, then it was reduced to insoluble U^IV. Thereby, this work provided an efficient and easy to handle sorbent material for extraction of U^VI.     

基于实际路网情境的配送车辆调度优化

在实际路网情境下结合车道数、车道宽度、路口信号灯设置等路网物理特性,构建了考虑综合交通阻抗的多车型车辆调度模型,提出了两阶段求解策略:第1阶段设计了改进A-star精确解算法用于计算客户时间距离矩阵;第2阶段针对实际路网的特征设计了混合模拟退火算法求解调度方案。以大连市某配送中心运营实例进行路网情境仿真试验,结果表明:改进A-star算法较改进Dijkstra算法具有更短的路径搜索时间;混合模拟退火算法求解结果较实际调度方案优化了13.1% 的综合成本;路网增流、区域拥堵和路段禁行三类路网情境均能对配送方案的车辆配置、路径选择、客户服务次序、作业时间和违约费用等5方面内容产生干扰,调度计划的制定需要详细考虑这些因素的变化。     

Thermal stability of ester linkage in the presence of 1,2,3‐Triazole moiety generated by click reaction

The copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC), so‐called “click” reaction, is one of most useful synthetic strategies to connect two polymer chains. 1,2,3‐Triazole ring (TA) produced by the click reaction has good thermal and chemical stability. However, we observed that block copolymers synthesized by the click reaction showed thermal degradation to give homopolymers when they are thermally annealed at high temperature, which is required for obtaining equilibrium microdomain structure. To investigate the origin of thermal instability of block copolymers, we synthesized model polystyrenes (PSs) using systematically designed bi‐functional atom transfer radical polymerization (ATRP) initiators containing TA. PS including both ester and TA groups showed thermal decomposition at relatively low temperature (e.g., 140 °C). MALDI‐TOF analysis clearly demonstrated that the cleavage site is the ester group adjacent to TA. We also found that the bromine group located at the polymer chain end plays an important role in pyrolysis of ester groups at low temperature. The pyrolysis occurs by syn‐elimination of the ester group. This result implies that the phase behavior of block copolymer synthesized by click reaction should be carefully investigated when high temperature thermal annealing is required. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 427–436     

Flux and fluence dependence of disorder produced during implantation of 11B in silicon

The flux and fluence dependence of disorder produced in silicon during the implantation of ¹¹B has been investigated at room temperature, -50°C. and -120°C. Implantations were carried out with 200 keV ¹¹B ions using current densities in the range from 0.06μA/cm² to 15μA/cm², and the disorder monitored by measuring the energy spectra of backscattered protons which were incident on the sample at 450 keV parallel to a (110) axis. Significant differences in the dependence of the disorder on ¹¹B flux and fluence were observed between the implantations performed at room temperature and those carried out at the two lower temperatures.     

退火温度对TiO2/CdSe纳米片异质结薄膜光电性能的影响

采用水热法在FTO上制备（001）高活性晶面主导的TiO₂纳米片薄膜,利用循环伏安法在TiO₂纳米片薄膜上沉积CdSe颗粒,制备了TiO₂/CdSe纳米片异质结薄膜。分别在150、250、350、450 ℃,氩气保护气氛中对样品进行退火。利用X射线衍射仪（XRD）、场发射扫描电镜（FESEM）、X射线光电子能谱分析仪（XPS）、紫外-可见（UV-Vis）分光光度计以及电化学工作站对不同温度退火后的TiO₂/CdSe纳米片异质结薄膜的微观形貌、晶体结构、光电化学性能进行表征和测试。结果表明：六方相CdSe纳米颗粒均匀包覆在TiO₂纳米片表面,直径30 nm左右;随着退火温度的升高CdSe纳米颗粒长大,形成光滑的CdSe薄膜,且晶化程度提高;TiO₂纳米片表面的Se元素与Cd元素发生氧化;TiO₂/CdSe纳米片异质结薄膜对可见光的吸收光谱发生红移,禁带宽度逐渐减小。光电化学性能测试表明随着退火温度的升高,TiO₂/CdSe纳米片异质结薄膜的光电流密度显著提高,开路电压减小,但由于SeO2和CdO的出现,导致填充因子减小,影响光电转换效率的提高。在本实验条件下,TiO₂/CdSe纳米片异质结薄膜的最佳退火温度为150 ℃,填充因子为0.77,光电转换效率达到3.12%。     

Annealing of silver nanolayers sputtered on polytetrafluoroethylene

Silver nanolayers sputtered on polytetrafluoroethylene and their changes induced by post‐deposition annealing at 100–300 °C are studied. Changes in surface morphology and roughness are examined by atomic force microscopy and by measurement of electrical sheet resistance by two‐point technique. Chemical composition was determined by X‐ray photoelectron spectroscopy (XPS) and electrokinetic analysis in dependence on the gold layer thickness. The annealing at 300 °C leads to significant rearrangement of the silver layer, and the transition threshold increases to 35 nm. The presence of oxidized structures on silver‐coated samples is observed in XPS spectra and by electrokinetic analysis, too. Annealing of pristine and silver‐coated poly(tetrafluoroethylene) at 300 °C results in significant change of the sample surface morphology and chemistry. There is observed formation of isolated silver islands on the surface, which could be connected with silver melting. Later, the silver agglomeration takes place. Copyright © 2013 John Wiley & Sons, Ltd.